仔細分析單片機操作系統RTX51的原理，將其移植到單片機實驗平臺上，并要求編寫一個簡短的程序來驗證其運行的正確性（比如，編寫兩個具有顯示不一樣內容的任務）。
注釋：由于英文原文會比較好，所以我沒有翻譯過來（不過也寫了部分的翻譯），直接提取出來一些英文，總結在一起。
1. 進程管理( Task Management )
1) 進程類型( Classes of Tasks )
RTX-51 recognizes two classes of tasks:
n Contain especially short responses and interrupt disable times.
n Contain a separate register bank and a separate stack area (register banks 1, 2 and 3).(Figure 1)
n Contain the highest task priority (priority 3) and can therefore interrupt standard tasks.
n All contain the same priority and can therefore not be mutually interrupted.
n Can be interrupted by c51 interrupt functions.
n A maximum of three fast tasks can be active in the system.
n Require somewhat more time for the task switching compared to fast tasks.
n Share a common register bank and a common stack area (register bank 0).
n The current contents of registers and stack are stored in the external (XDATA) memory during a task change.
n Can be interrupted by fast tasks.
n Can interrupt themselves mutually.
n Can be interrupt by c51 interrupt functions.
n A maximum 16 standard tasks can be active in the system.
