虛擬示波器制作資料

ID:127035 · 發表于 2016-6-16 21:35

下位機原理圖

部分程序：

/*
* Copyright (c) 2010 儀星電子
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* 著作權所有(C) 2010 儀星電子
*
* 本程序?yàn)樽杂绍浖荒梢罁?jù)自由軟件基金會所發表的GNU通用公共授權條款規定，
* 就本程序再為發布與／或修改；無論您依據的是本授權的第二版或（您自行選擇的）
* 任一日后發行的版本。
* 本程序是基于使用目的而加以發布，然而不負任何擔保責任；亦無對適售性或特定
* 目的適用性所為的默示性擔保。詳情請參照GNU通用公共授權。
* 您應已收到附隨于本程序的GNU通用公共授權的副本；如果沒有，請寫信至自由軟件
* 基金會：59 Temple Place - Suite 330, Boston, Ma 02111-1307, USA。
* Email yixingdianzi@126.com
* Email/MSN yixingdianzi@hotmail.com
* QQ 648887464
*/
/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
* File Name : main.c
* Author : MCD Application Team
* Version : V3.1.0
* Date : 10/30/2009
* Description : Virtual Com Port Demo main file
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/
/* Includes ------------------------------------------------------------------*/
//#include "stm32f10x.h"
#include "stm32f10x_gpio.h"
#include "usb_lib.h"
#include "usb_desc.h"
#include "usb_pwr.h"
#include "qdmx_usb.h"
#include "qdmx_adc.h"
#define SEND 32
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
extern __IO uint32_t count_in;
extern uint8_t Controla_a;
extern uint8_t Controla_b;
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
void Set_System(void);
void Callback(uint8_t *p);
void Delay(__IO uint32_t nCount);
void GPIO_configure(void);
/*******************************************************************************
* Function Name : main.
* Description : Main routine.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int main(void)
{
vu8 s;
/*設置系統時鐘*/
Set_System();
/*初始化USB模塊*/
Set_USBClock();
USB_Interrupts_Config();
USB_Init();
/*初始化AD模塊*/
m_adc_clk_config();
m_adc_gpio_config();
m_adc_Interrupts_Config();
m_adc_init();
/*初始化GPIO引腳作為放大控制引腳*/
GPIO_configure();
count_in=0;
/*默認初始值為放大1倍*/
GPIO_ResetBits(GPIOA,GPIO_Pin_0);
GPIO_ResetBits(GPIOA,GPIO_Pin_1);
GPIO_ResetBits(GPIOA,GPIO_Pin_2);
GPIO_ResetBits(GPIOB,GPIO_Pin_12);
GPIO_ResetBits(GPIOB,GPIO_Pin_13);
GPIO_ResetBits(GPIOB,GPIO_Pin_14);
while (1)
{
}
}
void GPIO_configure(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB , ENABLE);
RCC_AHBPeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE);
RCC_AHBPeriphClockCmd(RCC_APB2Periph_GPIOB , ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
}
void Delay(__IO uint32_t nCount)
{
for(; nCount != 0; nCount--);
}
void Callback(uint8_t *p)
{
if (GetENDPOINT(ENDP1) & EP_DTOG_RX)
{
FreeUserBuffer(ENDP1, EP_DBUF_IN);
UserToPMABufferCopy((uint8_t*) p, ENDP1_TX1ADDR, SEND);
SetEPDblBuf1Count(ENDP1,EP_DBUF_IN,SEND);
}
else
{
FreeUserBuffer(ENDP1, EP_DBUF_IN);
UserToPMABufferCopy((uint8_t*) p, ENDP1_TX0ADDR, SEND);
SetEPDblBuf0Count(ENDP1,EP_DBUF_IN,SEND);
}
}
#ifdef USE_FULL_ASSERT
/*******************************************************************************
* Function Name : assert_failed
* Description : Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* Input : - file: pointer to the source file name
* - line: assert_param error line source number
* Output : None
* Return : None
*******************************************************************************/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{}
}
#endif
/*******************************************************************************
* Function Name : Set_System
* Description : Configures Main system clocks & power
* Input : None.
* Return : None.
*******************************************************************************/
void Set_System(void)
{
ErrorStatus HSEStartUpStatus;
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration -----------------------------*/
/* RCC system reset(for debug purpose) */
RCC_DeInit();
/* Enable HSE */
RCC_HSEConfig(RCC_HSE_ON);
/* Wait till HSE is ready */
HSEStartUpStatus = RCC_WaitForHSEStartUp();
if (HSEStartUpStatus == SUCCESS)
{
/* Enable Prefetch Buffer */
FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
/* Flash 2 wait state */
FLASH_SetLatency(FLASH_Latency_2);
/* HCLK = SYSCLK */
RCC_HCLKConfig(RCC_SYSCLK_Div1);
/* PCLK2 = HCLK */
RCC_PCLK2Config(RCC_HCLK_Div1);
/* PCLK1 = HCLK/2 */
RCC_PCLK1Config(RCC_HCLK_Div2);
#ifdef STM32F10X_CL
/* Configure PLLs *********************************************************/
/* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
RCC_PREDIV2Config(RCC_PREDIV2_Div5);
RCC_PLL2Config(RCC_PLL2Mul_8);
/* Enable PLL2 */
RCC_PLL2Cmd(ENABLE);
/* Wait till PLL2 is ready */
while (RCC_GetFlagStatus(RCC_FLAG_PLL2RDY) == RESET)
{}
/* PLL configuration: PLLCLK = (PLL2 / 5) * 9 = 72 MHz */
RCC_PREDIV1Config(RCC_PREDIV1_Source_PLL2, RCC_PREDIV1_Div5);
RCC_PLLConfig(RCC_PLLSource_PREDIV1, RCC_PLLMul_9);
#else
/* PLLCLK = 8MHz * 9 = 72 MHz */
RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
#endif
/* Enable PLL */
RCC_PLLCmd(ENABLE);
/* Wait till PLL is ready */
while (RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
{
}
/* Select PLL as system clock source */
RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
/* Wait till PLL is used as system clock source */
while(RCC_GetSYSCLKSource() != 0x08)
{
}
}
else
{ /* If HSE fails to start-up, the application will have wrong clock configuration.
User can add here some code to deal with this error */
/* Go to infinite loop */
while (1)
{
}
}
}
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

復制代碼

元件清單：

Comment	Description	Designator	Quantity
Comment			1
104	Capacitor	C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C14, C16, C20, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C45, C46, C48	34	***
20pF	Capacitor	C12, C13	2	***
10uF	Polarized Capacitor (Radial)	C19, C21, C22, C23	4	***
47pF	Capacitor	C43, C44	2	***
LED	發光二極管	D1	1	***
1N4148	Diode	D3, D4, D5, D6, D7, D8, D9, D10, D11, D12	10	***
DC-DC	-5V DC 模塊	DC-DC	1	***
探頭	信號輸入接口探頭	IN1, IN2	2	***
JTAG	STM32芯片JTAG調試接口	J1	1	***
100uH	Inductor	L1, L3, L5	3	***
電源入口	電源接頭	P1	1	***
10K	Resistor	R1, R2, R3, R4, R5, R6, R7, R8, R12, R15, R17, R18	12	***
330	Resistor	R9	1	***
22	Resistor	R10, R13	2	***
2.2K	Resistor	R11	1	***
3.3K	Resistor	R14	1	***
1K5	Resistor	R16	1	***
0	Resistor	R19, R21	2	***
1k	Resistor	R20, R24, R27, R28, R36, R37, R38, R40, R41	9	***
560K	Resistor	R23, R42	2	***
100k	Resistor	R25, R35, R39, R50	4	***
240K	Resistor	R26, R44	2	***
200K	Resistor	R29, R34, R47, R49	4	***
2M	Resistor	R30, R43	2	***
5M	Resistor	R31, R45	2	***
1M	Resistor	R32, R46	2	***
500k	Resistor	R33, R48	2	***
39	Resistor	R51, R52	2	***
按鍵	按鍵	RST1	1	***
STM32F103C8/STM32F103CB	STM32F103系列處理器	U1	1	***
TL431	基準芯片	U2	1	***
7805	5V電源芯片	U3	1	***
1117-3.3	3.3V電源芯片	U4	1	***
TL082	常用運放	U5, U6, U7	3	***
CD4051BC	8-Channel Analog Multiplexer	U8, U10	2	***
TL084	常用運放	U9	1	***
USB_B口	USB-B口	USB1	1	***
8MHz	無源晶振	X1	1	***

[贈品]虛擬示波器開源板(綠油) 全套資料下載_PDF_C5075.7z (9.07 MB, 下載次數: 455)

ID:141447 · 發表于 2016-10-6 12:53

正需要呢謝謝樓主下來學習學習

ID:79034 · 發表于 2016-10-7 08:47

下載收藏下。好東西

ID:68189 · 發表于 2016-10-7 11:39

灰常不錯，灰常感謝！

ID:61876 · 發表于 2016-10-7 12:02

謝謝樓主，謝謝樓主

ID:141648 · 發表于 2016-10-8 10:36

做個記號，這個一點要頂

ID:147479 · 發表于 2016-11-11 21:28

我就是想知道CD4501是怎么工作的

ID:149144 · 發表于 2016-12-22 14:44

這板子看著好眼熟，好像嘉立創買元器件會送板子。但……貌似板子上的好多元器件又會缺貨

ID:157393 · 發表于 2016-12-24 19:07

做個記號，這個一點要頂

ID:134692 · 發表于 2017-1-17 22:14

正需要呢謝謝樓主下來學習學

ID:106950 · 發表于 2017-1-28 21:05

早就想做一個了開始整

ID:66118 · 發表于 2017-2-1 17:31

及時雨啊，正在尋找這個東西呢！

ID:163044 · 發表于 2017-2-9 17:51

謝謝分享....

ID:266116 · 發表于 2018-1-9 21:25

好資料!謝謝分享!

ID:284742 · 發表于 2018-2-22 13:01

很不錯，頂一下

ID:160500 · 發表于 2018-2-25 14:14

扣了三次黑幣，也沒有下載成

ID:142638 · 發表于 2018-4-12 14:27

謝謝樓主學習學習

ID:359762 · 發表于 2020-2-26 10:15

正好要做一個波形顯示的東西，看看他的上位機代碼可不可以用。。。希望是c#

ID:359762 · 發表于 2020-2-26 10:19

呃，原來沒有上位機源碼。。。被控制了。。。

ID:709722 · 發表于 2020-3-16 21:43

學習了那么久的單片機，有幸一見，不錯。

ID:166145 · 發表于 2020-3-24 21:56

太崇拜了，收藏?cái)€幣

ID:697254 · 發表于 2020-4-11 15:11

感謝樓主

ID:384552 · 發表于 2020-4-17 16:51

非常感謝

ID:17083 · 發表于 2021-4-15 11:39

不錯，好東西，

可以試著做一個！

ID:59830 · 發表于 2021-5-11 17:25

芯片漲價. STM32Fxxx 難買也貴，看能不能用其它國內單片機代替.
有空制作一下. 謝謝老帖.

ID:943755 · 發表于 2021-6-24 23:33

正好要用到，感謝樓主無私奉獻

ID:97181 · 發表于 2021-11-14 13:59

我往單片機內下載了程序，PC驅動也正確安裝，但程序鏈接沒有反應

ID:294212 · 發表于 2021-11-19 15:07

下載不成功，不知道是不是個別原因！

ID:977861 · 發表于 2021-11-23 12:58

正需要呢謝謝樓主下來學習

ID:977861 · 發表于 2021-11-25 12:11

資料不錯，收下了，有成品買嗎

ID:372579 · 發表于 2022-12-14 10:24

這個很不錯，可以做著玩啊玩

帳號		自動登錄	找回密碼
密碼			立即注冊

wwwxxx国产_337p日本欧洲亚洲大胆张筱雨_免费在线看成人av_日本黄色不卡视频_国产精品成熟老女人_99视频一区_亚洲精品97久久中文字幕_免费精品视频在线_亚洲色图欧美视频_欧美一区二三区

虛擬示波器制作資料

評分

相關帖子

	14^# 無效樓層，該帖已經被刪除