有人遇到過STC12C5A60S2串口2無法使用的問題嗎？

ID:523982 · 發表于 2019-4-30 11:22

有人遇到過STC12C5A60S2串口2無法使用的問題嗎？串口1正常能收發數據，用的官網提供的例程，百度發現很多人都遇到這個問題，目前還沒找到解決辦法。下載過http://www.izizhuan.cn/bbs/dpj-133507-1.html也無法使用。

/*------------------------------------------------------------------*/
/* --- STC MCU Limited ---------------------------------------------*/
/* --- STC12C5Axx Series MCU UART2 (8-bit/9-bit)Demo ---------------*/
/* --- Mobile: (86)13922805190 -------------------------------------*/
/* --- Fax: 86-0513-55012956,55012947,55012969 ---------------------*/
/* --- Tel: 86-0513-55012928,55012929,55012966----------------------*/
/* --- Web: www.STCMCU.com -----------------------------------------*/
/* --- Web: www.GXWMCU.com -----------------------------------------*/
/* If you want to use the program or the program referenced in the */
/* article, please specify in which data and procedures from STC */
/*------------------------------------------------------------------*/
#include "reg51.h"
#include "intrins.h"
typedef unsigned char BYTE;
typedef unsigned int WORD;
#define FOSC 11059200L //System frequency
#define BAUD 115200 //UART baudrate
/*Define UART parity mode*/
#define NONE_PARITY 0 //None parity
#define ODD_PARITY 1 //Odd parity
#define EVEN_PARITY 2 //Even parity
#define MARK_PARITY 3 //Mark parity
#define SPACE_PARITY 4 //Space parity
#define PARITYBIT EVEN_PARITY //Testing even parity
/*Declare SFR associated with the UART2 */
sfr AUXR = 0x8e; //Auxiliary register
sfr S2CON = 0x9a; //UART2 control register
sfr S2BUF = 0x9b; //UART2 data buffer
sfr BRT = 0x9c; //Baudrate generator
sfr IE2 = 0xaf; //Interrupt control 2
#define S2RI 0x01 //S2CON.0
#define S2TI 0x02 //S2CON.1
#define S2RB8 0x04 //S2CON.2
#define S2TB8 0x08 //S2CON.3
bit busy;
void SendData(BYTE dat);
void SendString(char *s);
void main()
{
#if (PARITYBIT == NONE_PARITY)
S2CON = 0x50; //8-bit variable UART
#elif (PARITYBIT == ODD_PARITY) || (PARITYBIT == EVEN_PARITY) || (PARITYBIT == MARK_PARITY)
S2CON = 0xda; //9-bit variable UART, parity bit initial to 1
#elif (PARITYBIT == SPACE_PARITY)
S2CON = 0xd2; //9-bit variable UART, parity bit initial to 0
#endif
BRT = -(FOSC/32/BAUD); //Set auto-reload vaule of baudrate generator
AUXR = 0x14; //Baudrate generator work in 1T mode
IE2 = 0x01; //Enable UART2 interrupt
EA = 1; //Open master interrupt switch
SendString("STC12C5A60S2\r\nUart2 Test !\r\n");
while(1);
}
/*----------------------------
UART2 interrupt service routine
----------------------------*/
void Uart2() interrupt 8
{
if (S2CON & S2RI)
{
S2CON &= ~S2RI; //Clear receive interrupt flag
P0 = S2BUF; //P0 show UART data
P2 = (S2CON & S2RB8);//P2.2 show parity bit
}
if (S2CON & S2TI)
{
S2CON &= ~S2TI; //Clear transmit interrupt flag
busy = 0; //Clear transmit busy flag
}
}
/*----------------------------
Send a byte data to UART
Input: dat (data to be sent)
Output:None
----------------------------*/
void SendData(BYTE dat)
{
while (busy); //Wait for the completion of the previous data is sent
ACC = dat; //Calculate the even parity bit P (PSW.0)
if (P) //Set the parity bit according to P
{
#if (PARITYBIT == ODD_PARITY)
S2CON &= ~S2TB8; //Set parity bit to 0
#elif (PARITYBIT == EVEN_PARITY)
S2CON |= S2TB8; //Set parity bit to 1
#endif
}
else
{
#if (PARITYBIT == ODD_PARITY)
S2CON |= S2TB8; //Set parity bit to 1
#elif (PARITYBIT == EVEN_PARITY)
S2CON &= ~S2TB8; //Set parity bit to 0
#endif
}
busy = 1;
S2BUF = ACC; //Send data to UART2 buffer
}
/*----------------------------
Send a string to UART
Input: s (address of string)
Output:None
----------------------------*/
void SendString(char *s)
{
while (*s) //Check the end of the string
{
SendData(*s++); //Send current char and increment string ptr
}
}

復制代碼

ID:110606 · 發表于 2019-4-30 16:32

我之前用官網的歷程發現有問題，后來就不用了

ID:155507 · 發表于 2019-5-1 10:51

你可以試試這個

#include "reg51.h"
#define FOSC 11059200L
#define BAUD 115200
#define NONE_PARITY 0 //無校驗位
#define ODD_PARITY 1 //奇校驗
#define EVEN_PARITY 2 //偶校驗
#define MARK_PARITY 3 //標記校驗
#define SPACE_PARITY 4 //空校驗
#define PARITYBIT NONE_PARITY
#define S2RI 0x01
#define S2TI 0x02
#define S2RB8 0x04
#define S2TB8 0x08
sfr AUXR = 0x8e;
sfr S2CON = 0x9a;
sfr S2BUF = 0x9b;
sfr BRT = 0x9c;
sfr IE2 = 0xaf;
bit busy;
void SendData(char dat);
void SendString(char *s);
void main()
{
#if (PARITYBIT == NONE_PARITY)
S2CON = 0x5a; //8位可變波特率 (無校驗位)
#elif (PARITYBIT == ODD_PARITY) || (PARITYBIT == EVEN_PARITY) || (PARITYBIT == MARK_PARITY)
S2CON = 0xda; //9位可變波特率,校驗位初始為1
#elif (PARITYBIT == SPACE_PARITY)
S2CON = 0xd5; //9位可變波特率,校驗位初始為0
#endif
BRT = -(FOSC/32/BAUD); //設置獨立波特率發生器的重載初值
AUXR = 0x14; //獨立波特率發生器工作在1T模式
IE2 = 0x01; //使能串口2中斷
EA = 1; //開總中斷
SendString("STC12C5A60S2\r\nUart2 Test !\r\n");
while(1);
}
void Uart2() interrupt 8 using 1
{
if (S2CON & S2RI)
{
S2CON &= ~S2RI; //清除接收完成標志
P0 = S2BUF; //P0顯示串口數據
P2 = (S2CON & S2RB8); //P2.2顯示校驗位
}
if (S2CON & S2TI)
{
S2CON &= ~S2TI; //清除發送完成標志
busy = 0;
}
}
void SendData(char dat)
{
while (busy); //等待上個數據發送完成
ACC = dat; //取得偶校驗位P
if (P) //根據P來設置串口數據的校驗位
{
#if (PARITYBIT == ODD_PARITY)
S2CON &= ~S2TB8; //置校驗位為0
#elif (PARITYBIT == EVEN_PARITY)
S2CON |= S2TB8; //置校驗位為1
#endif
}
else
{
#if (PARITYBIT == ODD_PARITY)
S2CON |= S2TB8; //置校驗位為1
#elif (PARITYBIT == EVEN_PARITY)
S2CON &= ~S2TB8; //置校驗位為0
#endif
}
busy = 1;
S2BUF = ACC; //發送數據
}
void SendString(char *s)
{
while (*s) //判斷字符串結束標志
{
SendData(*s++); //發送字符
}
}

復制代碼

ID:319557 · 發表于 2020-5-14 17:05

angmall 發表于 2019-5-1 10:51
你可以試試這個

對我很有用。十分感謝！！！

帳號		自動登錄	找回密碼
密碼			立即注冊

wwwxxx国产_337p日本欧洲亚洲大胆张筱雨_免费在线看成人av_日本黄色不卡视频_国产精品成熟老女人_99视频一区_亚洲精品97久久中文字幕_免费精品视频在线_亚洲色图欧美视频_欧美一区二三区

有人遇到過STC12C5A60S2串口2無法使用的問題嗎？

相關帖子

	板凳無效樓層，該帖已經被刪除